Conjured Circuits Cloak & Dagger
Cloak & Dagger is a fully analog filter and distortion module in 12HP for the Eurorack modular system. Based closely on the classic and coveted ARP 2600 "post-lawsuit" 4-pole lowpass filter (Submodule 4072), some modifications are introduced including an output buffer stage to compensate for the loss of low frequencies at higher resonance ("resonance compensation"), temperature compensated 1v/oct tracking,¬†and two additional attenuverting CV inputs for controlling the cutoff frequency.
Two independent drive circuits are also on board which can be set to drive the input ("pre-filter"), drive the entire output ("post-filter"), both, or fully bypassed. There's an initial drive level control as well as a drive level CV input with attenuator.
Drive LED color corresponds to currently engaged drive(s):
- Green LED = Pre-Filter Drive engaged
- Red LED = Post-Filter Drive engaged
- Orange LED = Both pre-filter and post-filter drives engaged
(LED reacts to audio input)
- 43 mA +12V
- 47 mA -12V
- 0 mA 5V
- 25 mm deep